Zoom

Safety without compromises - before, during and after the shot. Specifically designed as a projectile-absorbing surfacing material, SPORTEC® shooting provides protection over floors, walls and ceilings of indoor shooting ranges and nearby outdoor structures. SPORTEC® shooting slabs installed on floors should be sealed by the user with a polyurethane coat carrying a B1 fire-resistance rating. The coat provides a seamless surface which can be easily cleaned of gunpowder deposits. On walls and ceilings this coating is normally not required. Wherever it is installed, SPORTEC® reliably absorbs dangerous ricochets and rebounds as documented by independent test reports. The material's remarkable elasticity makes bullet holes practically invisible after absorption.

 

Benefits:

 

  • Reliable absorption of ricochets and rebounding bullets
  • Prefabricated rubber-crumb slabs with integrated connector pins
  • Certified by test report B-31 / 2009 from Shooting Safety Institute, Munich / Germany
Home » Rubber Flooring » Safety Surfaces » Sportec shooting print
Material:
substructure: PU-bonded rubber granule slabs; upper layer: 2 components of self-levelling PU coating (not supplied)
Area weight:
approx. 24 kg/m²
Surface coating:
approx. 2.5 kg/m²
Material thickness:
40 mm (± 3 mm)
Width:
500 mm (± 3 mm)
Length:
500/1,000 mm (± 3 mm)
Impact sound insulation:
Δ LW = 47 dB at 40 mm (Ö-standard S5101) for the substructure